Class 1 Transformer

$0.00

Description

  • Class 1 Transformer
  • Always reserve an additional 10%-15% transformer capacity to allow for resistance
  • To dissipate heat properly, transformer must be mounted with breakers facing downward with 12″ surrounding clearance
  • According to NEC code #240-3-D, 25A breakers must use 10AWG wire or larger for 25A or 300W. Recommend using THHN wire
  • The use of low voltage magnetic dimmer is recommended for best dimming performance
  • 50W minimum load when using LED
  • cETL or cUL listed transformers
  • Warranty Information: See our Terms and Conditions page for details
  • For General Technical Information, see our General Technical Information page for details

Special Notes: * All Prima fixtures and lighting systems must not share circuit with any existing fluorescent fixtures. Use Prima transformer, driver and/or ballast to comply with cUL/cETL listing; or all warranties are void.

 

Additional information

35-600-120-12

Primary: 120V / 60Hz / 5.1 Amps / 612W
Boost Tap: 120V / 60 Hz / 5.4 Amps / 648W
2 X Secondary: 12V / 25Amps / 300W
Special Note: Use boost tap when voltage measure less than 10 volts at secondary power feed

35-600-277-12

Primary: 277V / 60Hz / 2.2 Amps / 612W
Boost Tap: 277V / 60 Hz / 2.3 Amps / 648W
2 X Secondary: 12V / 25Amps / 300W
Special Note: Use boost tap when voltage measure less than 10 volts at secondary power feed

35-600B-277-12

Primary: 277V / 60Hz / 2.2 Amps / 612W
Multi-Boost Tap: 12V-15V
2 X Secondary: 12V / 25Amps / 300W

PDF Files

No Attachment Available At This Moment.

IES Files

No Attachment Available At This Moment.

Customization

Catalog No.

(35-600-120-12) Magnetic transformer 120V-12V - 600W - 2 breakers - w/ boost-tap

(35-600-277-12) Magnetic transformer 277-12V - 600W - 2 breakers - w/ boost-tap

(35-600B-277-12) Magnetic Transformer 277-12V - 600W - 2 breakers - w/ multi-tap from 12V to 15V

Secondary Wire

(CO-WIRE10-2-SV) 20ft of 10 Gauge THHN Wire for connecting from power feed to remote transformer / Max load 25 Amp / For MLV

(STD) No Need To Order THHN Secondary Wires

SKU: 600W (MLV Dimmable)
Project Name: Project Type:
Spec Sheet: Please Select Options Categories: , ,

This multipoint canopy is already in the configurator and is at max capacity. Please empty configurator or edit fixture quantities to continue.

Empty Configurator